In the �Alarm 1� and �Alarm 2� settings, select either OFF or ON which selects whether or not the input signal to the alarm input terminal is effective. When ON is selected, the following settings should be followed when the alarm signal is input. [Alarm Output] When the alarm signal is triggered, an alar m signal is output. � It is necessary to set the �Output Port Setting� in advance to ON. See page 31. [Go to the preset position] When the alarm signal is triggered, the camera and lens move to the position specified in the memory. � It is necessary to carry out the settings for �Changing the position memory� in advance. See page 56. [FTP] When the alarm signal is triggered, the JPEG still image will be uploaded to the FTP server. � It is necessary to carry out the settings for the �FTP setting� in advance. See page 36.
