JVC TH-A10J
Instrukcja Obsługi

MAIN MENU Settings

Changing the DECODE MODE
(See page 18) This option is used to change the digital audio decode mode. The default setting of [AUTO/PCM] is recommended for regular use. When the playback source is DVD, you may select a DECODE MODE.

3.

Use the 2/3 cursors to set the DSP mode.
When the source is DVD: You may choose between �SURROUND� j �OFF� When the source is not DVD or TUNER*: You may choose between j SURROUND j THEATER j LIVE CLUB j DANCE CLUB j HALL j PAVILION j OFF j (back to the beginning) * When the source is set to tuner, the MAIN MENU will not be displayed.

1. 2.

Open the MAIN MENU
See page 39, �Opening the MAIN MENU�.

Move the pointer to DECODE MODE using the 5/� cursors.

Adjusting the volume
(See page 16)

1. 3.
Use the 2/3 cursors to set the decode mode.
The following decoding options are available: AUTO/PCM, DOLBY DIGITAL, or DTS. � See page 18 for details of each in decode mode.

Open the MAIN MENU.
See page 39, �Opening the MAIN MENU�.

2.

Move the pointer to VOLUME using the 5/� cursors.

Note: � Only audio for discs for the selected decode mode may be played when a decode mode other than �AUTO/PCM� is selected. When the decode mode is changed and a disk has been played back, return the decode mode to �AUTO/PCM�.

3.

Use the 2/3 cursors to adjust the volume level.
Press 3 to increase the volume. Press 2 to decrease the volume.

Changing the DSP MODE
(See page 20)

1. 2.

Open the MAIN MENU.
See page 39, �Opening the MAIN MENU�.

Move the pointer to DSP MODE using the 5/� cursors.

40