jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
Tekstowy podgląd strony 50 (kliknij aby zobaczyć)
50
EN
USER MAINTENANCE
After Use
LENS COVER Open/Close Ring
1 2 3 4 5 6 1
Remove. PUSH Button EJECT Switch
Turn off the camcorder. Open the LCD monitor* fully. Slide EJECT to open the cassette holder, then remove the cassette. Press PUSH to close and lock the cassette holder. Close and lock the LCD monitor*. Slide BATTERY RELEASE to remove the battery pack. Turn the LENS COVER Open/Close Ring to close the lens cover.
BATTERY RELEASE Set to �OFF�.
Cleaning The Camcorder
To clean the exterior, wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth. Open the LCD monitor* and wipe gently with a soft cloth. Be careful not to damage the monitor*. Close the LCD monitor*. To clean the lens, blow it with a blower brush, then wipe gently with lens cleaning paper. To detach the eyepiece, turn it counterclockwise and pull it out. Remove dust from the viewfinder using a blower brush. Re-attach the eyepiece and turn it clockwise.
2 3 4 5 6
Remove. PUSH Button EJECT Switch
*GR-SXM320 only. NOTES: � Avoid using strong cleaning agents such as benzine or alcohol. � Cleaning should be done only after the battery pack has been removed or other power units have been disconnected. � Mold may form if the lens is left dirty. � When using a cleaner or chemically treated cloth refer to the cautions of each product. � When removing the eyepiece, be sure to hold the viewfinder securely.
