JVC MX-K60
Instrukcja Obsługi

Maintenance
To get the best performance of the unit, keep your discs, tapes, and mechanism clean.

Cleaning the unit
� Stains on the unit Should be wiped off with a soft cloth. If the unit is heavily stained, wipe it with a cloth soaked in water-diluted neutral detergent and wrung well, then wipe clean with a dry cloth. � Avoid the following since they may cause damage to the unit. - DO NOT wipe it with a hard cloth. - DO NOT wipe it strong. - DO NOT wipe it with thinner or benzine. - DO NOT apply any volatile substance such as insecticides to it. - DO NOT allow any rubber or plastic to remain in contact with it for a long time.

Handling cassette tapes
� If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating. � If the tape is loose, it may get stretched, cut, or caught in the cassette. � Be careful not to touch the tape surface.

Handling discs
� Remove the disc from its case by holding it at the edge while pressing the center hole lightly. � Do not touch the shiny surface of the disc, or bend the disc. � Put the disc back in its case after use to prevent warping. � Be careful not to scratch the surface of the disc when placing it back in its case. � Avoid exposure to direct sunlight, temperature extremes, and moisture.

� Avoid the following places to store the tape: � In dusty places � In direct sunlight or heat � In moist areas � Near a magnet

To clean the disc Wipe the disc with a soft cloth in a straight line from center to edge.

DO NOT use any solvent�such as conventional record cleaner, spray, thinner, or benzine�to clean the disc.

� 22 �