jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
Tekstowy podgląd strony 10 (kliknij aby zobaczyć)
MX-K5R
Removing the tuner board (See Fig.15 and 16)
Prior to performing the following procedure, remove the metal cover and CD changer unit. 1. Disconnect the card wire from connector CON01 on the tuner board. 2. Remove the two screws L attaching the tuner board.
Main board CON01
Removing the eco board (See Fig. 15 and17)
Prior to performing the following procedure, remove the metal cover and CD changer unit. 1.Disconnect the harness from connector PJ2, PJ3 and RCW5 on the eco board. 2.Remove the two screws M attaching the eco board.
PJ3
Tuner board
Fig.16
RCW5
PJ2
Eco board
Fig.17
Removing the rear cover
(See Fig.18)
Prior to performing the following procedure, remove the metal cover, CD changer unit, heat sink & AMP board and tuner board. 1. Remove the five screws N attaching the rear panel.