|
|
|
Kto jest w sklepie?
Sklep przegląda 5985 gości |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Wszystko w porządku.
Instrukcja czytelna i kompletna.
Dziękuję.
all right!
thank you.
;
Bardzo dobra instrukcja. Zawiera wszystko co potrzeba, polecam!
 ;
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
;
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
;
...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
MX-G68V/MX-G65V
Removing the tuner board (See Fig.11 and 13)
Prior to performing the following procedure, remove the metal cover and CD changer unit. 1. Disconnect the card wire from connector CON01 on the tuner board. 2. Remove the two screws L attaching the tuner board.
Main board CON01
Rear panel
Tuner board
Fig.13
Removing the rear panel
(See Fig.14)
Prior to performing the following procedure, remove the metal cover, CD changer unit, heat sink & amplifier board and tuner board. 1. Remove the one screw M, three screws N and three screws N' attaching the rear panel.
Rear panel
N' M N
Fig.14
Removing the main Board (See Fig. 15)
Prior to performing the following procedure, remove the metal cover, CD changer unit, heat sink & amplifier board, tuner board and rear cover. 1. Disconnect the card wire from connector FCW3 and the harness from connector JCW1, JCW2, ECW1 and HCW3 on the main board. 2. Disconnect the harness from connector PCW1 on the power transformer board. 3. Remove the screw G attaching the main board holder. (See Fig.8) 4. Remove the two screws O attaching the heat sink and bottom chassis.
FCW3 ECW1 JCW1 JCW2 HCW3 Main board
O
Transformer board
PCW1
Fig.15
1-8
|
|
|
> |
|
