Schematy są ale można wysilić się i zrobić kolorowy skan i o większej rozdzielczości. Wtedy schematy płytek będą czytelniejsze. Całość super jako wartość merytoryczna. Wszystkie dane potrzebne do podłączenia różnego rodzajów urządzeń takich gramofon, CD itd.
jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Tekstowy podgląd strony 5 (kliknij aby zobaczyć)
KD-SX777
Main amplifier board CN501
Removing the main amplifier board assembly (See Fig.4 and 5)
1. Remove the front chassis. 2. Remove the bottom cover. 3. Remove the two screws C attaching the main amplifier board assembly on the bottom of the body. 4. Remove the three screws D attaching the main amplifier board assembly on the back of the body. 5. Disconnect connector CN501 on the main amplifier board assembly from the CD mechanism assembly.
C
Fig.4
C
D
D
Removing the CD mechanism assembly (See Fig.6 )
1. Remove the front chassis. 2. Remove the bottom cover. 3. Remove the main amplifier board assembly. 4. Remove the three screws E attaching the CD mechanism assembly from the top cover. Top cover CD mechanism assembly
Fig. 5
E
E
Removing the control switch board (See Fig.7 and 8 )
1. Remove the front chassis. 2. Remove the four screws F attaching the rear cover on the back of the front panel unit. 3. Remove the control switch board from the front panel unit.