Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 15 (kliknij aby zobaczyć)
Storing your own sound adjustments
You can adjust the sound modes (BEAT, POP, SOFT) to your preference and store your own adjustments in memory. � There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
4 5
Repeat steps 2 and 3 to adjust the other items. To turn on or off the loudness function.
� See page 13 for details.
LOUD
1
Call up the sound mode you want to adjust.
SCM
6
Press and hold SCM until the sound mode you have selected in step 1 flashes on the display.
SCM
� See page 14 for details.
Ex.: When you select �SOFT�
2
To adjust the bass or treble sound level.
Select �BAS� or �TRE.�
Your adjustment made for the selected sound mode is stored in memory.
SEL
7
Repeat the same procedure to store other sound modes.
To reset to the factory settings
Ex.: When you select �TRE�
Repeat the same procedure and reassign the preset values listed in the table on page 14.
3
Adjust the bass or treble level.
� See page 13 for details.
