JVC HR-VP783U
Instrukcja Obsługi

EN

25

Basic Recording
Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. SHUTTLE ring POWER PLAY ( 3 )

2 Select recording channel
On the front panel: Press CH5�. On the Remote: a� Press CH + or �. or b� Press the Number keys then ENTER. (The channel changes after a few seconds whether you press ENTER or not.) � If you connect the TV and the VCR only using the RF connection, press TV/VCR on the Remote so that the VCR mode indicator lights on the front display panel, to view the program to be recorded.
REW PLAY FF

4

3 Set tape speed

POWER

Press SP/EP to set the recording speed.

MENU
VIDEO (MONO)L�AUDIO�R
SP EP VCR

OK

CH
SP/EP

REC

STOP/EJECT

PAUSE

4 Start recording
On the front panel: Press REC ( ¶ ). On the Remote: While holding REC ( ¶ ), press PLAY ( 3 ). � If �VIDEO CALIBRATION� is set to �ON� (default setting: pg. 39), this VCR checks the tape condition for about seven seconds, then starts recording. (This means that the first seven seconds of the program will not be recorded. If this is inconvenient for you, follow the steps below: 1 Press REC ( ¶ ) and PAUSE ( 8 ) to start Video Calibration. 2 Then press PLAY ( 3 ) to start recording after Video Calibration is complete.

23
STOP/EJECT (7/0) PAUSE ( 8 ) POWER
1 4 7 2 5 8 0 3 6 9
4

2

2 �b

2 �a
1

To pause recording
Press PAUSE ( 8 ). To resume recording, press PLAY ( 3 ).

3
FF ( ¡ ) PAUSE ( 8 )

To stop recording
Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel.

REW ( 1 )

To rewind the tape
Press REW ( 1 ) (or turn the SHUTTLE ring on the front panel to the left).

4

3

2 �b
STOP ( 7 )

To fast-forward the tape
Press FF ( ¡ ) (or turn the SHUTTLE ring on the front panel to the right).

To eject the tape
This VCR can check the tape condition during recording (and playback), and realizes the best possible pictures. Press STOP/EJECT ( 7 / 0 ) on the front panel when the tape is not running. � You can also eject the cassette with the VCR turned off. Press POWER.

1

Make sure the record safety tab is intact. If not,

Load a cassette

To turn off the VCR

cover the hole with adhesive tape before inserting the cassette.