Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 22 (kliknij aby zobaczyć)
EN
23
Recording Features
S D O
Record One Program While Watching Another
1
During recording... � Press TV/VCR. The VCR�s VCR indicator goes out. (If you are using the RF connection ( pg. 4) to view the output from your VCR, the TV broadcast being recorded disappears.) � If you are using the AV connection ( pg. 4) to view the output from your VCR, change the TV�s input mode from AV to TV.
ENGAGE TV MODE
1
1 7 4
2 5 8 0
3 6 9
2
SELECT CHANNEL FOR VIEWING
2
TV/VCR
Use the TV�s channel selector to set the channel you want to watch.
4
C.RESET
Display Elapsed Recording Time
�� ��
1
3
Before recording starts, press C.RESET. The counter resets to zero and displays the exact elapsed time as the tape runs.
RESET COUNTER TO ZERO
2
During recording, press OSD at any time to see the elapsed time. All indications corresponding to the current status of the VCR are displayed for 5 seconds. The counter display remains on the screen indicating the elapsed time. Press OSD again to remove the display. � Make sure �SUPERIMPOSE� is set to �ON� ( 19). � The indications are not recorded. pg.
