Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 19 (kliknij aby zobaczyć)
20
EN
MODE SNAPSHOT
VIDEO RECORDING Basic Features
Snapshot
This interesting feature lets you record two types of digital still images that look like photographs onto a tape, as well as keeping them in the camcorder�s built-in memory. It is a great way to spice up footage of events such as parties, weddings and graduations.
SELECT SNAPSHOT MODE
1
Viewfinder
Turn the Select Dial to any position except AUTO LOCK, then press the MODE Button to switch from one mode to the other as shown in the illustration to the left. �When the Select Dial is set to AUTO LOCK, it is not possible to select the Snapshot Mode. Only the Full image (no display) is available. Go to step 2.
P
P (Pin-Up)
TAKE SNAPSHOT
2
No display (Full) SNAPSHOT Viewfinder (ex. Pin-Up)
Press the SNAPSHOT Button. �A still image is recorded onto the tape and into the camcorder�s built-in memory. �There are two Picture Modes you can choose from when storing in the camcorder�s memory: FINE and STANDARD. The maximum number of shots you can take varies according to the selected setting. The selected Picture Mode and remaining number
1
of shots are displayed on the screen. The factorypreset is FINE. If you want to change the setting, perform �Picture Mode Setting� ( pg. 45).
2
3
4
5
FINE Allows you to shoot up to approx. 22 still images. STD (Standard) Allows you to shoot up to approx. 44 still images. If you press during recording . . . .... first there is a momentary camera shutter-type blackout together with the sound effect of a shutter closing, then a still image appears. The next image starts in the centre of a black screen and wipes in toward the corners. The screen changes as shown in the illustrations 1 to 5 to the left and the screens 1 to 5 are recorded onto the tape in the selected mode. Only the still image 3 is stored in the built-in memory in the selected mode, then the camcorder resumes normal recording. If you press during Record-Standby mode . . . .... first there is a momentary camera shutter-type blackout together with the sound effect of a shutter closing, then a still image appears. The scene you are currently aimed at starts in the centre of a black screen and wipes in toward the corners. The screen changes as shown in the illustrations 1 to 5 to the left. The screens 1 to 3 are recorded onto the tape in the selected mode. Only the still image 3 is stored in the built-in memory in the selected mode, then the camcorder re-enters the Record-Standby mode.
